First, be sure to remove all remaining seal and glue residue from the cavity in the base. The best tool for this job is a dental scaler but an X-Acto knife can be used. A Q-Tip dipped in lacquer thinner or acetone will help soften the glue. It is very important to remove all traces of the old glue and seal so the new seal will be properly seated.
Once the seal cavity is clean the new seal needs to be glued in place. The best product for this job is Loctite Super Glue Professional....
Replacing the Powder Seal in my Machined Aluminum EZ-FILL Base
Once the seal cavity is clean the new seal needs to be glued in place. The best product for this job is Loctite Super Glue Professional....
Replacing the Powder Seal in my Machined Aluminum EZ-FILL Base